Advertisement
"
Preparing to play
First, have a go at making the sound of the
flute on the upper keyboard.
Set all the tone levers, push switches, tablets and sliding controls to the OFF or normal position, as
illustrated in the figure.
MIN
D
D
Ip
ll
ü
D
Rotate the MASTER VOLUME control to the
MAX
Note:
It takes about 5 seconds for the lamp
to light after the power
has been
switched on. This is a normal design
function.
Use your right foot to depress the
Can you hear the sound?
expression pedal slightly.
If you can't hear any sound, refer to page 30.
You will note that the farther you
Depress
the keys on
the upper
push the pedal down, the louder
keyboard with your fingers.
the sound becomes.
4
Advertisement
