Table of Contents
Advertisement
CONNECTIONS
Antenna ground
Although
grounding
ig not afways necessary for reception, it is
recommended
for protection against darnage from lightning if an
outdoor
FM antenna
is used. Grounding
is recommended as well
to help reduce noise and hum.
NOTE:
Never make the ground connection to a gas pipe as sparks could
cause the gas to ignite.
Antenna ground
Insert the connecter
obliquely
from
above, and
push it down
until it locks, thus ensuring that
it is
connected,
When
desconnecting
the
connector,
pull it in the opposite direction while pressing the
left and right claws.
CONNECTING
SPEAKER
WIRES
1. Strip off the vinyl covering and twist the strands together.
7
3. Now
return
the lever
to its original position
to secure
the cord
NOTE
Do not altow any of the cord's conductors to protrude from the
terminals
or
touch
any
other
conductors.
Malfunctioning
or
breakdovins may occur when conductors came into contact with
each other,
About Speaker impedance
When
speaker
systems
are Connected to only one of the
SPEAKERS A, 8 terminals, such speakers should have rated
impedance in the range of 8 — 16Q.
NOTE
©
Speaker system A
{R)
{L) | Speaker system 8
| Power outlet
/
iNustration not appl
iG U.K, Models
/
rd
CONNECTING
THE
POWER
CORD
i ) Household electrical outlet.
/
(For U.S.A. and Canadian models}
je
Household electrical outlets are provided with specific polari-
> Leng sot is negative (ground) side.
ty, 4 positive side and a negative (ground)
utilizes such polarity in order to improv:
This unit
quality. As
shown
in the dlustration, be sure to insert the power plug
so that its blades match
the width of slots in the outlet.
Insert the wide blade into the ground side slot.
7
<ARB1070>
Advertisement
Table of Contents
