Connecting The Antenna Cable To The Rf In Terminal; Antenna / Cable Connection - Panasonic PT-52DL10 Operating Instructions Manual

Installation
Connecting the Antenna Cable to the RF In Terminal
Antenna Connection - For proper reception of VHF / UHF channels, an external antenna is required. For best reception
an outdoor antenna is recommended. Antenna Mode must be set to projection TV.
VHF Antenna
Mixer_
75 _
Coaxial Cable
UHF Antenna
D
RF In Terminal ANT1 SPL[T ANT2
Coaxial Antenna PI°_--_A'_
Cable Box
Antenna / Cable Connection
Incoming Cable From Home Antenna (75 _)
VHF / UHF U II
on Back of Set
tN -4-
(.)
Cable Connection - For reception of cable channels (01 o 125) connect the cable supplied by your local cable company.
Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)
Incoming 75 _2 Cable (From Cable Company)
VHF / UHF _(_
on Back of Set
(/
Note:
Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable
converter box is required for proper reception. Check with your local Cable company for its compatibility requirements.
8