Sending Evacuation Tone - Motorola APX 2 User Manual

• A tone sounds.
• The display shows the configurable programmed alert text and intelligent lighting.
Procedure:
1 To respond, perform one of the following actions:
• Press the 3-Dot Programmable button.
• If the radio is connected to the Remote Speaker Microphone (RSM), press the 1-Dot button
on the RSM.
• Press the PTT button.
NOTE: The PTT button must be configured in Customer Programming Software (CPS) to
enable this function.
The radio cancels the indications, a tone sounds, and the radio sends an acknowledgment to the
command terminal.
9.3

Sending Evacuation Tone

Procedure:
1 Press and hold the PTT button.
2 Press the Emergency button.
A tone sounds when the Emergency button is released. The tone sounds in all radios within the
talkgroup until the PTT button is released.
NOTE: Radio does not transmit evacuation tone if the radio is in secure mode.
MN009203A01-AD
Chapter 9 : Fireground
57