Adjusting The Input Level For Dolby Surrround System - Sony STR-GX69ES Operating Instructions Manual

Ol ejlrciialialemia(-moleracolerscem —tai-veit
yXolierss chate mm cal=mm lelels) @ M=h'Z-1 Ine) am Ole) |o)'aelelageleiele|
System
5 When the INPUT BALANCE control is set to the
center position and the AUTO INPUT BALANCE
indicator lights, the input balance is adjusted
automatically, but if you want to adjust it
manually, turn the INPUT BALANCE contro! until
the monaural sound, such as a dialogue, heard
from the surround speakers ts minimized.
Select the DOLBY PRO LOGIC MODE according
to your speaker system with the PRO LOGIC
MODE button.
Press the T (Test) TONE button on the remote
commander. A test tone (pink noise) signal is
sent in succession to each speaker.
Adjust the level of rear speakers with the
SURROUND LEVEL REAR +- buttons and the
center speaker volume with the SURROUND
LEVEL CENTER +- buttons, so that sound from
each speaker is heard in the same volume level
at the listening position. (When adjusting the
VOLUME control on the receiver, all speakers is
adjusted simultaneously.)
1 Press SURROUND ON/OFF to ON.
2 Press SURROUND MODE so that the HALL or |
SIMULATED indicator disappears from the
display.
3 Select a program source with the FUNCTION
selector and start playback.
4 Press the PRO LOGIC MODE button so that no
indicator of DOLBY PRO LOGIC mode lights up.
22