Panasonic ES-EY30A-V503 Operating Instructions Manual page 22

Problem
Cannot
remove hair.
The hair
becomes
stubble.
When
epilating
The appliance
is not
removing the
hair as well as
before.
Sensitive area
cap comes off
during
operation.
The appliance
is not cutting When
shaving
as well as
before.
Cannot file.
When
caring for
feet
Cannot get rid
of odor.
Possible cause
The appliance is used
on long hair.
The epilation head
surface is not in close
enough contact with
the skin.
The appliance is not
moved against the
flow of hair.
The appliance is
moved too fast.
Hair dust has
accumulated.
The skin protector or
discs are deformed,
cracked, or damaged.
The appliance is
being pressed too
hard against the skin.
The appliance is not
applied at a 90° angle
to your skin.
Hair dust has
accumulated.
The blade is
deformed.
The blade is worn out.
The file is worn out.
The appliance is used
in the SOFT mode.
It is dirty.
Action
Use on hair
approximately 2 to 3 mm
long.
Make the epilation head
in closer contact with the
skin and move.
Move the appliance
against the flow of hair.
(Refer to page 16.)
Move it slowly.
(Approximately
3~5 cm/sec)
(Refer to page 16.)
Clean the hair dust.
Request repair at an
authorized service
centre.
Contact the skin with
gentle force.
Apply at a 90° angle to
your skin.
(Refer to page 16.)
Clean the hair dust.
Replace the blade.
Guidelines for
replacement:
Outer foil:
Approximately 1 year
Inner blade:
Approximately 2 years
Replace the file.
Guidelines for
replacement:
Approximately 1 year
Try using it in POWER
mode.
Soak the file in water for
approximately 24 hours
before washing.
21