Specifications - Sony Super Bright VPH-1001Q Operating Instructions Manual

Specifications
Optical
Projection system
3 picture tubes, 3 lenses, Direct
projection system
7-inch high-brightness monochrome
tubes, with coolant sealed
Projection lens = VPH-10010/1001QM
High-performance hybrid lenses
F1.0/130 mm
VPH-1044Q/1044QM
HACC (High-resolution Aspherical
and Color Corrected) lenses
F1.0/135 mm
Projected picture size
Factory-adjusted to 100 inches
measured diagonally
70-250 inches measured diagonally
adjustable by changing the parts
Light output 750 Im
Picture tube
General
Color system PAL, SECAM, NTSC and NTSC1.43
systems, switched automatically
Resolution 700 TV lines (video input)
1,000 TV lines (RGB input)(VPH-
1044Q/1044QM only)
Test signal Cross-hair test pattern generator
incorporated
Speaker 5x9em (2x 3'/2 inches), 1 unit,
1.5W
inputs LINE IN
S VIDEO: 4-pin mini DIN connector
Y (luminance) signal: 1 Vp-p+2 dB,
sync negative, 75 ohms
terminated
C (chrominance) signal: burst
0.286 Vp-p+2 dB, 75 ohms
terminated (NTSC)
0.3 Vp-p+2 dB, 75 ohms
terminated (PAL)
Chrominance Luminance
signal (C) signal (Y)
as
ex
Ground Ground
VIDEO: BNC connector
Composite video input, 1 Vp-p+2
dB, sync negative, 75 ohms
terminated
AUDIO: phono jack
VPH-1001Q/1044Q;: -5 dBs,
Impedance: more than 47 kohms
VPH-1001QM/1044QM: 500
mVrms, Impedance: more than
47 kohms
32
RGB/COMPONENT IN (VPH-1044Q/
1044QM only):
R,G,B: BNC connectors
Red, green, blue inputs
0.7 Vp-p+2 dB, 75 ohms terminated,
positive
G SYNC: BNC connector
Sync on green input, | Vp-p22 dB,
75 ohms terminated, positive
SYNC/HD: BNC connector
Composite syne input, 0.3-4 Vp-p,
75 ohms terminated, negative
Horizontal sync input, 0.3-4 Vp-p,
75 ohms terminated, negative
VD: BNC connector
Vertical sync input, 0.3-4 Vp-p, 75
ohms terminated, negative
R-Y, B-Y: BNC connectors
0.7 Vp-p
Y: BNC connector
1.0 Vp-p, sync negative, 75 ohms
terminated
CONTROL S$ INPUT: stereo
minijack, 5 Vp-p
VIDEO OUT: BNC connector
Composite video output, 1 Vp-p£2
dB, impedance 75 ohms, output
video signal from the LINE IN
connector
* The separated Y and C signals input
to the S VIDEO connector is
output as a composite video signal.
CONTROL S OUTPUT: minijack,
5 Vp-p
Outputs
Power requirements
VPH-1001Q/1044Q; 120V AC, 50/
60 Hz
VPH-1001QM/1044QM: 220-240 V
AC, 50/60 Hz
Power consumption
VPH-1001Q/1044Q: 230 W max,
3.0 A max.
VPH-1001QM/1044QM: 210 W
Approx. 532 x 288 x 597 mm (w/h/d)
(21 x 11 */ax 23 */a inches)
With the brackets pushed down,
including the projection parts and
controls
Mass VPH-1001Q/1001QM: Approx. 30 kg
(66 Ib 2 02)
VPH-1044Q/10440M: Approx. 38 kg
(83 Ib 12 oz)
Dimensions