Specifications - Sony Super Bright VPH-1000Q Manual

Specifications
[Optical]
Projection system
3 picture tubes, 3 lenses, direct projection
system
§.5-inch high-brightness monochrome
tubes, with coolant sealed
Projection lens © VPH-1000Q/1000QM:
High-performance hybrid lenses
F1.0/130 mm
VPH-1042Q/1042QM:
HACC (High Resolution Aspherical and
Color Corrected) lenses
F1.0/135 mm
Projected picture size
70 — 250 inches measured diagonally
Factory-adjusted to 100 inches measured
diagonally
Light output 600 Im
Color system
Picture tube
switched automatically
Resolution 1,000 TV lines (RGB inputs)
650 TV lines (video input)
RGB inputs Character display capacity:
2000 character
(80 letters x 25 lines)
Horizontal frequency: 15.75 kHz
Vertical frequency: 50/60 Hz
Test signal Cross-hair test pattern generator incorpo-
rated
Speaker § x9cm (2 x 3'/ inches), 1 unit, 3 W
Inputs
S VIDEO: 4-pin mini DIN connector
Y (luminance) signal: 1 Vp-p +2 dB,
sync negative, 75 ohms terminated
C (chrominance) signal: burst
0.286 Vp-p +2dB, 75 ohms terminated
(NTSC)
0.3 Vp-p +2dB, 75 ohms terminated
(PAL)
Chrominance Luminance
signal (Y)
signal (C) ve
Ground Ground
VIDEO: BNC connector
Composite video input,
1 Vp-p +2 dB, sync negative,
75 ohms terminated
AUDIO: phono jack
VPH-1000Q/1042Q: -5 dBs
Impedance: more than 47 kohms
VPH-1000QM/1042QM: 0.5 Vrms
Impedance: more than 47 kohms
PAL, SECAM, NTSC and NTSC.s.s3 systems,
RGB IN (VPH-10420/10420M only)
R: BNC connector
Red input, 0.7 Vp-p +2 dB,
75 ohms terminated, positive
G/G SYNC: BNC connector
Green input, 0.7 Vp-p +2 dB,
75 ohms terminated, positive
Green with sync input,
1 Vp-p +2 dB, 75 ohms terminated,
positive
B: BNC connector
Blue input, 0.7 Vp-p +2 dB,
75 ohms terminated, positive
SYNC/HD: BNC connector
Composite sync input,
0.3 - 4 Vp-p,
75 ohms terminated, negative
Horizontal sync input,
0.3 — 4 Vp-p,
75 ohms terminated, negative
VD: BNC connector
Vertical sync input, 0.3 - 4 Vp-p,
75 ohms terminated, negative
TO VPR-722S
14-pin connector
Output MONITOR OUT
VIDEO: BNC connector
Composite video output,
1 Vp-p +2 dB, impedance
75 ohms,
Selected video output
With the remote controller:
Video signal from the controller*
Without the remote controller:
Video signal from the LINE IN VIDEO
connector+
* The separated Y and C signals input to the S
VIDEO connector is output as a composite video
signal.
Power requirements
VPH-1000Q/1042Q: 120 V AC, 50/60 Hz
VPH-1000QM/1042QM: 220 - 240 V AC,
50/60 Hz
Power consumption
VPH-1000Q/1042Q: 230 W max.,
3.0 A max.
VPH-1000QM/1042QM: 210W
Approx. 532 x 288 x 597 mm (w/h/d)
(21 x 115/s x 23°/s inches)
With the brackets pushed down,
incl. projecting parts and controls
Weight VPH-1000Q/1000QM: Approx. 30 kg
(66 Ib 2 oz)
VPH-10420/1042QM: Approx. 38 kg
(83 Ib 12 02).
Accessories supplied
AC power cord (1)
Spacer for 200" projection (4)
ys}Gug
Dimensions
Design and specifications subject to change without notice.
21