User Instructions - Zanussi DI 720 Instructions For The Use And Care

User instructions
Getting to know your machine - DI 720
Controls and How to Use Them (see diagram page 4)
A Start/Stop Button
Press to start, press to switch off.
B Water Temperature Selection Button
This allows you to select a high or low
water temperature. The water will
normally heat up to 65°C which is the
temperature required for energetic wash
programmes (see Wash Programmes
page 19). If one of the gentle programmes
is required, press the button and the
water will heat up to 55°C only.
Press the button to release the switch and
return to normal (65°C).
C Quick Wash Button
It allows a considerable reduction of the
programme-time (see washing
programmes page 19).
D Mains-on Indicator
This light will come on when the start
button is pressed and the machine starts
to operate. It will not go out until the
switch is pressed to turn the machine off,
once the dishwashing cycle has been
completed.
F Salt Refill Indicator
The indicator shows when the salt
container needs refilling (see page 11).
G Programme Selector Dial
This is marked with letter A-F.
The programme guide helps you to decide
which programme to select (see Wash
Programme Chart page 19). To set the
machine to the chosen programme, turn
the dial clockwise until the index points
exactly to the letter for the required
programme.
H Wash Cycle Phase Indicator
This shows which phase the machine has
reached and will help to assess how much
longer the programme will take to
complete and also indicates that the cycle
is proceeding normally.
ll! Prewash
m Main wash
iii Cold rinses
3% Warm rinse
§§ Hot air drying