About The System Control Connections - Kenwood KE-7090 Instruction Manual

KE-7090 (En)
| ABOUT THE SYSTEM CONTROL CONNECTIONS
[XS8] Mode : lets you combine (XQ, [XS], and (X88) terminals
{SL16] Mode: for [SL16] terminals only
—
2. lf your amp or receiver does not have a system contro! terminal, do not connect any
3. Do not connect system contro! cords to any components other than those specified
by Kenwood. It may cause a malfunction and damage your equipment.
iS 3)
| ABOUT THE SYSTEM CONTROL OPERATIONS
Remote Control 7
The power of this unit can be turned ON/OFF from the system remote control unit provided with your amplifier or
receiver.
i
You can easily change the system control mode with the following
operation. Do this operation after completing all connections.
Front panel side
@This operation will not affect items stored in the memory. Bottom panel side
Sc SE GOES SEES) ESAT SS a