Setting Schedule Of Low Noise Setting - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

3-8-3

Setting schedule of low noise setting

Operation Setting-Monitor (Outdoor Unit-All)
Operation Setting-Monitor (Schedule Setting)
Operation Setting-Monitor (Schedule Setting)
Operation Setting-Monitor (Schedule Setting)
When the setting is complete, click "OK" button.
e
Notes
When outdoor units with 2 setting levels and outdoor
units with 3 setting levels are mixed in one refrigerant
system, the menu screen in which 3 setting levels can
be set is displayed. In this case, even if the outdoor unit
with 2 setting levels is set to Level 3, the actual setting
will be Level 2.
Click "Schedule" button on "Operation Setting-Moni-
a
tor".
"Schedule Setting" screen opens.

1
2
Click "On" button in "Schedule On/Off ".
b
When new schedule is set, click "New" button. Go to
c
step f.
When changing the already input schedule, click "Edit"
d
3
button. Go to step f.
When deleting the already input schedule, click "De-
e
lete" button.
5
4
Set "Start Time" and "End Time" of low noise opera-
f
tion using "" and "" buttons. Then, set "Level" and
"Priority".
8
Click the button you want to set from "1", " 2", or "3"
g
button on "Level".
7
Click the button you want to set from "Low Noise" or
6 h
"Performance" button on "Priority".
When the setting is complete, click "OK" button.
i
9
Check the set contents. If the setting is correct, click
j
"Close" button.
Note
When timer setting is complete, if "On/Off" setting item
is set to "On", the operation starts according to the set
schedule.
10 10
En-45