Page 2
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
Page 3
During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
DS-K7R83X Remote Control Pad Chapter 1 Application Scenarios Control the barrier status: Add Turnstile → Barrier Open/Close Get the turnstile status: Add Turnstile → Home Page → Live View...
DS-K7R83X Remote Control Pad Chapter 2 Quick Settings 2.1 Activate Set an activation password to activate the device. Figure 2-1 Activate Power on the device, and the device enters the activation page automatically. Create an activation password and confirm it.
DS-K7R83X Remote Control Pad Figure 2-2 Select Language 2. Click Next. 2.3 Set Security Question If you forget the password, you can verify by security questions and answers. Figure 2-3 Set Security Question Select the security question and enter the answer.
Page 9
DS-K7R83X Remote Control Pad Select Wired or Wi-Fi, and click Next. Wired Network Note Make sure the device has connected to a network. If enable DHCP, the system will assign the IP address and other parameters automatically. If disable DHCP, you should set the IP address, the subnet mask, and the gateway.
DS-K7R83X Remote Control Pad Chapter 3 Local Settings 3.1 Home Page After quick configuration, the device enters the home page automatically. Figure 3-1 Home Page Turnstile Management Tap Add Turnstile, you can add the turnstile to the device. ● Tap Emergency Mode, you can open all barriers.
DS-K7R83X Remote Control Pad Steps 1. Tap Add Turnstile, enter password to enter the add turnstile page. Or tap , enter password to enter the settings page. Tap Turnstile Management → + to enter the add turnstile page. 2. Enter the turnstile group name, and tap Next.
DS-K7R83X Remote Control Pad Figure 3-3 Turnstile Group Details 2. Tap , tap Down or Up to adjust the turnstile order. 3. Tap Turnstile Group Name to change the name. 4. Tap Add Turnstile to add other turnstiles. 5. Tap , confirm and delete this turnstile group.
DS-K7R83X Remote Control Pad 3.2.4 Turnstile Group Control You can view the live image of the turnstile group and batch control the barrier status. After adding the turnstile group, turnstile group name and turnstile number are shown in the upper left corner on the home page. Tap the turnstile group name to view the live image. Select the turnstile group to be controlled, tap the check mark in the upper right corner to confirm the selection.
DS-K7R83X Remote Control Pad 3.3 Communication Settings 3.3.1 Set Wired Network Configure wired network. After Configuration, the device can communication with client software and platform. Steps 1. Tap , enter the password to enter the settings page. Tap Communication → Wired Network .
DS-K7R83X Remote Control Pad Figure 3-6 Wi-Fi Settings 2. Slide to enable Wi-Fi. 3. Tap to refresh the Wi-Fi list. 4. Configure Wi-Fi parameters. - Select the Wi-Fi on the list, and enter the Wi-Fi password. Tap OK to connect.
DS-K7R83X Remote Control Pad Figure 3-7 Hotspot Configuration 2. Slide to enable device hotspot. 3. Tap Device Hotspot Settings to configure hotspot name and password. 4. Scan the QR code to login to the mobile web. 3.4 Time Settings You can set the device time.
DS-K7R83X Remote Control Pad Figure 3-8 Define Button Slide to enable Define Button and select the button function. Single Lane Control Select the added turnstile group, direction and operation. When you press the button, the barrier will open, remain open or remain closed.
Page 18
DS-K7R83X Remote Control Pad Figure 3-9 System Maintenance System Information You can view the device model, serial No., versions, address, production data, and open source code license. Restore to Factory Settings All data will be cleared. The system will reboot to take effect.
DS-K7R83X Remote Control Pad Chapter 4 Quick Operation via Web Browser 4.1 Language Settings You can select a language for the device system. Click in the top right of the web page to enter the Device Language Settings page. You can select a language for the device system from the drop-down list.
DS-K7R83X Remote Control Pad Chapter 5 Operation via Web Browser 5.1 Login You can login via the web browser. Note Make sure the device is activated. Login via Web Browser Enter the device IP address in the address bar of the web browser and press Enter to enter the login page.
DS-K7R83X Remote Control Pad You can view the model, serial No. and firmware version. 5.4 Configuration 5.4.1 View Device Information View the device name, language, model, serial No., version, etc. Click Configuration → System → System Settings → Basic Information to enter the configuration page.
DS-K7R83X Remote Control Pad By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. 5.4.3 Change Administrator's Password Steps 1.
Page 23
DS-K7R83X Remote Control Pad Set the parameters and click Save to save the settings. Figure 5-3 TCP/IP Network Card Select a network to set. DHCP If disable the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway.
Page 24
DS-K7R83X Remote Control Pad Figure 5-4 Wi-Fi 2. Enable Wi-Fi. 3. Add a Wi-Fi. 1) Click Manual Add. 2) Enter SSID, and select the security mode. 3) Click OK. 4. The added Wi-Fi will be shown in the list. Click Connect, and enter the password to connect the Wi-Fi.
DS-K7R83X Remote Control Pad Note You can only set hotspot password on the web page. If you need to view the password, please enter the local settings page on the device. Click Save. 5.4.6 Upgrade and Maintenance Reboot device, restore device parameters, and upgrade device version.
Page 26
DS-K7R83X Remote Control Pad To raise network security, disable SSH service. The configuration is only used to debug the device for the professionals. Note SSH is disabled by default. If the device reboots after SSH is turned on, it will revert to the...
DS-K7R83X Remote Control Pad Chapter 6 Configure the Device via the Mobile Browser 6.1 Login You can login via mobile browser. Note Make sure the device is activated. ● Login by IP Address The device network and the mobile Wi-Fi should be in the same LAN.
DS-K7R83X Remote Control Pad 6.3 Home Page You can view the turnstile pictures, network status and basic information. Figure 6-1 Home Page Turnstile Picture You can view the added turnstile picture. When no turnstiles are added, please add the turnstile group first.
DS-K7R83X Remote Control Pad When pictures are added, tap the picture to enter the picture editing page. Tap to change the turnstile picture. Tap to delete the turnstile picture. Network Status You can view the network connection status or enter the network configuration page.
Page 30
DS-K7R83X Remote Control Pad Figure 6-2 Time Settings → System Configuration → Time Settings. Device Time You can view current time. Time Zone Select the time zone where the device is located from the drop-down list. Tap Save.
DS-K7R83X Remote Control Pad 6.4.3 User Management You can change user password. → User Management on the home page. Tap the user, enter the old password and create a new password. Tap Save. 6.4.4 Network Set Wired Network Parameters Set wired network.
Page 32
DS-K7R83X Remote Control Pad Figure 6-3 Wired Network 2. Set wired network parameters. DHCP If you disable the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway. If you enable the function, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4 default gateway automatically.
Page 33
DS-K7R83X Remote Control Pad 3. Tap Save. Wi-Fi Settings Set Wi-Fi parameters. Steps 1. Tap → Communication → Wi-Fi on the home page. Figure 6-4 Wi-Fi Configuration 2. Enable Wi-Fi.
DS-K7R83X Remote Control Pad 3. Select the Wi-Fi name, and enter Wi-Fi password to connect. 4. Optional: Add Wi-Fi. 1) Tap Add Wi-Fi. 2) Enter Wi-Fi Name , and select Encryption Type. 3) Tap OK. Result After Wi-Fi configuration, you can configure the device remotely.