Table of Contents
Advertisement
Delete button
Update button
Operation time
Operation
Operation mode
switching
Temperature setting
Upper/lower tempera-
ture limits setting
R/C prohibition
Reset button
OK button
Cancel button
Apply button
585555
Overview of operation pattern creation
Schedule Setting screen
5
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
Deletes the time pattern selected with .
Reflects the contents corrected with
Sets the time pattern control time.
Sets operation start/operation stop.
Sets the operation mode to Auto, Cool, Dry, Fan, or Heat.
Depending on the system type, and other mode, it may not be possible to
normally reflect the operation mode setting.
Set by direct numeric input or with the [v] and [
When upper/lower temperature limits are set, the temperature can only be
set within that set range.
When upper/lower temperature limits setting is performed, the set tem-
perature can only be set within that range.
Restricts operation from R/C.
Deletes the contents being set and returns to the contents before the set
contents were changed. This button is effective only if pressed before the
[Add]/[Update]/[Apply] button is pressed.
Reflects the set operation pattern and closes the setting screen.
Closes the setting screen. The contents being changed are discarded.
Reflects the set operation pattern.
New pattern
Select a pattern for which an operation pattern is not
set.
Click the [Edit] button.
Correction
Select the pattern to be corrected.
Click the [Edit] button.
Using a duplicate
Select the pattern to be duplicated.
Make a copy by pressing the [Copy] button.
Select the duplication destination.
5
When the [Paste] button is clicked, the copy is pasted
to the duplication destination.
Click the [Edit] button.
182
to
at the time pattern.
] buttons.
Λ
Advertisement
Table of Contents
