Table of Contents
Advertisement
RX-1180, RX-1190
(FUNCTION switches/indicators
The indicators light for the specified functions.
[VIDEO/AUX]
Press when listening to a stereo component connected to the
VIDEO/AUX jacks.
[TAPE]
Press when listening to a cassette tape.
[TUNER]
Press when listening to a radio broadcast.
[PHONO]
Press when playing records on a turntable connected to the
PHONO jacks.
[CD]
Press when listening to a CD player connected to the CD jacks.
(5) REMOTE SENSOR window
(6) VOLUME/BALANCE
indicator
The indicator shows volume level. When either of BALANCE
switches is pressed, the indicator shows BALANCE between
left and right channels.
The indicator flashes during muting.
() VOLUME switch
This switch is pressed to adjust the volume.
+: Increases volume.
—: Decreases volume.
(@® BALANCE switches
Use to adjust the balance between the sounds from the left
and right speakers.
L: Press to decrease the sound on the right side.
R: Press to decrease the sound on the left side.
CENTER:
The display returns to CENTER when both L and R
are pressed simultaneously.
(2 MUTING switch
Pressing this switch alternately interrupts and returns the
sound. VOLUME/BALANCE indicator flashes during muting.
@0) MIC jack (excluding U.S. and Canadian models)
Used toconnect microphones equipped with standard plugs.
@) MIXING
LEVEL
(excluding
U.S. and
Canadian
models)
Adjusts the volume of the microphone.
Increasing the microphone volume reduces the source volume.
CASSETTE TAPE DECK SECTION
e
Thecassette deck receiver is provided with an automatic
tape selector function.
Deck | ... NORMAL/CrOz, METAL
Deck I... NORMAL/CrO2
@) Deck | switches
OAS
(STOP/EJECT) .. Stops tape travel. Ejects cassette if
pressed when tape is stopped.
[> (PLAY).............. Playback.
PFE)
oc
eeecee eee Fast forward
a (REW)............... Rewind
@)Deck Il switches
GO(PAUSE)............ Temporarily stops tape travel. Can-
cels
pause
mode
when
pressed
again.
L/S (STOP/EJECT).... Stops tape travel. Ejects cassette if
pressed when tape is stopped.
E> (PLAY) .3acectesswens Playback
Leal (let ER
ee
Fast forward
aa (REW)............... Rewind
@ (REC)...
Set to the recording mode.
@ DECK Il TAPE COUNTER
3-digital display measures tape travel on deck Il.
@) DECK
Il TAPE COUNTER
RESET button
@)Recording indicator (REC)
Lights during recording. Flashes during tape copy standby
mode or remote control pause.
@) COPY MODE switches/indicators
These switches and indicators are used to select the copy
mode.
SYNCHRO ........ Normal speed copying (Permits you to lis-
ten to playback normally.)
HIGH SPEED..... High speed copying (double-speed,
half-
time copying)
(8) DOLBY NR switch/indicator
Press to activate noise reduction system. Use to play back
tapes recorded using Dolby B NR noise reduction.
¢
Tapes recorded using Dolby B NR noise reductior should
always be played back with the noise reduction system on.
Sound quality will be adversely affected if they are played
back with the system off, or if tapes recorded usinga differ-
ent noise reduction system are played back with the Dolby
B NR system on.
*
It is recommended that tapes recorded using Dolby B NR
be so marked on the label. This will help to prevert incor-
rect setting of the noise reduction switch during ph-yback.
Noise
reduction
manufactured
under
license from
Dolby
_ Laboratories Licensing Corporation.
"'Dolby'' and the double-D symbol are trademarks ¢ Dolby
Laboratories Licensing Corporation.
Advertisement
Table of Contents
