Advertisement
LAMP REPLACEMENT
Lamp Replacement
After extended
use, if the TV picture turns dark, the color looks unusual
or LAMP INDICATOR
light
turns on, then it is time to replace the lamp with a new lamp.
Lamp should
be replaced
after 4,000
hours of use.
WARNING:
The lamp gets very hot! The lamp may explode if improperly handled.
To avoid injury, please observe the following
precautions.
¥
Do not open lamp compartment or attempt to remove lamp assembly unless the lamp assembly is being replaced.
¥
Unplug the product s power cord from the AC outlet before attempting to replace the lamp assembly.
¥
If the lamp is in use when failure occurs or if the lamp has exploded, wait at least 30-45 minutes for the lamp to
cool before opening the lamp compartment or touching the lamp assembly or any broken pieces.
¥
Broken lamp pieces can cause injury. Handle with gloves to avoid cuts.
¥
Do not place any foreign objects inside the lamp compartment.
¥
When installing a new lamp, follow handling instruction included with the new lamp. Do not touch glass surface of
new lamp.
¥
Please dispose of old lamp assembly properly.
CAUTION[
A LAMP indicator will light when lamp becomes hot. Unplug product s power cord from the AC outlet and allow
lamp to cool for at least 30-45 minutes.
If LAMP indicator is still lit, please contact your authorized service center.
(see page 8)
NOTES:
¥
Contact
your Hitachi dealer for a new lamp unit.
Using other lamps may cause damage to
the TV Set.
TYPE NAME:
DLP
TM
LAMP ASSEMBLY
PART NUMBER:
DP00341
¥
When replacing
the lamp, let it cool down completely,
for approximately
30 to 45 minutes
after the power has been switched
off and A.C. cord has been unplugged.
¥
Do not touch the glass of the new lamp or make it dirty which can shorten
the life
of the lamp and ruin the picture quality.
¥
Keep the lamp out of the reach of children
and away from flammable
materials.
¥
Do not pour water onto the removed
lamp or put any object inside the lamp.
¥
Once the lamp is removed,
do not put flammable
materials
and metal objects inside the
lamp receptacle
on the TV set.
Do not touch the receptacle.
¥
Install the new lamp securely, otherwise
the picture may become dark or it may cause
severe overheating
and possible fire.
¥
Install the lamp cover correctly, otherwise
power will not come on.
¥
When you have finished
changing
the lamp, remember
to reset the LAMP TIME COUNTER.
(See page 49 to reset the LAMP TIME COUNTER.)
¥
LAMP MUST BE DISPOSED
OF PROPERLY.
FOR ASSISTANCE,
PLEASE
CALL
1-800-HITACHI
8O
Advertisement
