Advertisement
Available languages
Available languages
Phillips#2 screwddver and an adjustablewrench.
Ensure
that
the unit
ls unplugged
from
its
electrical
outlet
and
its contents
are emp-
tied
before
proceeding
Excessive Weight Hazard
Use two or more people when moving the wine
cooler.
t_ Carefully lay the unit on Its back.
5, Install the Bottom Hinge Assembly onto
the left side of the base° Tighten the screws_
6_ Reinstall the two levelling legs.
7. Unlnslall the Top Hinge Assembly.
8o Transfer the Door Plug and the Cablnet
Plugs from the left side to the right side of
the door and cabinet, respectively
2. Unscrew the two leveling legs that are on
the base of the unit.
3. Uninstall the Bottom Hinge Assembly.
Carefully fit the door squarely onto the
cabinet. Slide the door downward unlil the
Bottom Hinge Pin is fully inserted tnto the
bottom of the door_
4. Carefully sitda the door offof the Top Hinge
Pin and set the door aside.
10. tnstail the Top Hinge Assembly onto the left
slda of the cablnat,Walt 60 minutes
before reconnecting
power to the
Wine Cooler,
Top Hinge Assembly
D
t
!
Hinge Pin
Cabinet PIu; I
;
Bottom Hing_Assemb,y
,
ttom
.,ngePin
Ensure a!l screws and fittings are Itght[y fastened
and that the
door Is squarely
aligned with the cabinet before uslngo Adjust
If
necessary,
6
Advertisement
