Quick Charge; Charging With The Supply Unit - Philips Wet&Dry S7000 Series User Manual

16
English
Charging

Quick charge

Charging with the supply unit

1
2
Charging in the SmartClean system (S7970/26 Only)
1
2
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty.
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 50 minutes.
Note: You cannot use the shaver while it is
charging.
After approx. 5 minutes of charging the shaver
contains enough power for one shave.
1 Make sure the shaver is switched off.
2 Put the small plug in the shaver and put the
supply unit in the wall socket.
The display of the shaver indicates that the
shaver is charging.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
shaver.
Note: When the battery is full, the display
switches off automatically after 30 minutes.
1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall socket.