Quick Charge; Charging With The Supply Unit - Philips S9000 Prestige Manual

English
Notification symbol
Overheating
Blocked shaving heads
Charging

Quick charge

Charging with the supply unit

If the shaver overheats during charging, the notification
symbol flashes. When this happens, the shaver
automatically stops charging. Charging continues once
the temperature of the shaver has decreased to the
normal level after approx. 10 minutes.
If the shaving heads are blocked, the notification symbol
continuously lights up red. The replacement reminder
and the cleaning reminder alternately flash white and
the shaver beeps. In this case, the motor cannot run
because the shaving heads are dirty or damaged. If the
shaving heads are dirty, you have to clean them. If the
shaving heads are damaged, you have to replace them.
Charge the shaver before you use it for the first time
and when the display indicates that the battery is almost
empty.
Charging takes approx. 1 hour. A fully charged shaver has
a shaving time of up to 60 minutes.
After approx. 5 minutes of charging the shaver contains
enough power for one shave.
Note: You cannot use the shaver while it is charging.
After approx. 5 minutes of charging the shaver contains
enough power for one shave.
1 Make sure the shaver is switched off.
33 33