Read Range For Hf Applications Using Aan Xi9F Hf - AEG ARE i2.0x HF Manual

Version: 13
Manual ARE i2.0x HF release V3
Page: 7 / 25
The antenna AAN Xi9F HF is connected via a 2-pin connector on top of ARE i2.0x HF.
ARE i2.0x HF uses an external antenna AAN Xi9F HF. There are air core coil transponders like disks and ferrite core coil
transponders like glass tube transponders. It is important to understand the impact of orientation of transponders relative
to AAN Xi9F HF. Optimum orientation is perpendicular to the top side of the antenna for air core coil transponders. In this
orientation, the highest read range can be achieved.
Reading distance depends a lot on the particular installation. Absolute values only make sense based on a particular
transponder. Absolute values make no sense for transponder types, because the values will vary too much. Above are the
guiding principles to achieve the best possible read range.

2.1.6 Read Range for HF Applications using AAN Xi9F HF

Transponder acc. to ISO 15693 (40mm x 40mm x 5mm)
transponder perpendicular (recommended)
The highest read range is achieved right above the center of AAN Xi9F top side.
Manual ARE i2.0x HF release V3.docx