2. Replace the M2x3 screw that secure the audio board to the computer.
3. Connect the audio cable to the connector on the audio board.
4. Install the:
a.
battery
b.
base cover
c.
microSD card
5. Follow the procedure in
Power connector port
Removing power connector port
1. Follow the procedure in
2. Remove the:
a.
microSD card
b.
base cover
c.
battery
3. To remove the power connector port:
a. Disconnect the power connector cable from the connector on the system board [1].
b. Remove the M.2.0x3.0 screws that secure the power connector port on the computer [2].
c. Slide and lift the power connector port away from the computer [3].
16
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.