Installing The System Fan; Power Connector Port; Removing Power Connector Port - Dell P72G Owner's Manual

a Disconnect the system fan cable from the connector on the system board [1].
b Lift the system fan away from the computer [2].

Installing the system fan

1 Place the system fan into the slot on the computer.
2 Connect the system fan cable to the connector on the system board.
3 Install the:
a chassis frame
b battery
c base cover
4 Follow the procedure in

Power connector port

Removing power connector port

1 Follow the procedure in
2 Remove the:
a base cover
b battery
3 To remove the power connector port:
a Remove the M2*3 screw that secures the display cable to the computer [1].
After working inside your computer.
Before working inside your computer.
Removing and installing components 25