Table of Contents
Advertisement
Trouble shooting
en
Refitting
Place the cover back in position (Fig. A).
1.
First retighten the two screws at the bottom, then the
2.
two screws at the top (Fig. B).
Fitting the oven door See the section
3.
.
door
Do not use the oven again until the panels have been
correctly fitted.
Upper glass cover
Before opening the top cover, remove any spills with a
cloth.
Use glass cleaner if possible.
For cleaning, remove the top cover. To do this, hold the
cover securely on both sides with both hands and pull it
upwards.
If the cover hinges become loose, note the letters
marked on them. The hinge with the letter R must be
fitted on the right, and the hinge with the letter L must
be fitted on the left.
After cleaning, re-assemble the top cover following the
same procedure in reverse order.
Only close the top cover once the burners have cooled
down.
26
3Trouble shooting
I f a fault occurs, there is often a simple explanation.
T r o u b l e s h o o t i n g
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Malfunction table
If your meal is not successful, please refer to section
We have tested the recipe for you in our cooking studio
you will find useful cooking tips and tricks for cooking,
baking and roasting.
:
Repairs that are not carried out properly are dangerous.
Fitting the oven
Repairs must only be performed by one of our after-
sales service technicians.
Malfunction
The oven does
not work.
Oven not hot.
The burner does
not ignite.
Warning – Risk of electric shock!
Possible cause
The circuit
breaker is defec-
tive.
Power cut.
Dust on the con-
tacts.
Power has failed
or ignition plugs
are damp.
.
. Here,
Remedy/information
Look in the fuse box to see if
the circuit breaker is defective.
Check whether the kitchen light
and other kitchen appliances
are working.
Turn the control knobs several
times to the left and right.
Light the gas burner with a gas
lighter or a match.
Advertisement
Table of Contents
