Table of Contents
Advertisement
Getting to know your appliance
en
Burner knob
You can adjust the heat setting of the hotplates using
the four burner knobs.
The Positions
Zero position
þ
Settings area
—
˜
There is a limit stop at the end of the settings area. Do
not turn the timer beyond this.
Position
0
"Off" position
1-9 Heat settings
The indicator light will light up when you switch on an
electric hotplate.
Ignition button
This button activates the electronic ignition system.
When you press the button, all igniters ignite at the
same time.
14
Function/gas oven
The oven is switched off.
Large flame = highest setting
Economy flame = lowest setting
Electric hotplate/function
The hotplate is switched off.
1 = Lowest setting
9 = Highest setting
Cooking compartment
Various functions in the cooking compartment make
your appliance easier to use. For example, the cooking
compartment is well lit and a cooling fan prevents the
appliance from overheating.
Opening the appliance door
If you open the appliance door when the appliance is in
operation, the appliance will continue to operate as
before.
Interior lighting
With most heating functions and other functions, the
interior lighting in the cooking compartment will remain
lit while the oven is in operation. When the function
selector is turned to bring operation to an end, the
lighting will go out.
By turning the function selector to the interior lighting
setting, you can switch on the lighting without heating
the oven. This makes it easier to clean your appliance,
for example.
Cooling fan
The cooling fan switches on and off as required. The
hot air escapes above the door.
Caution!
Do not cover the ventilation slots. Otherwise, the
appliance may overheat.
So that the cooking compartment cools down more
quickly after operation, the cooling fan continues to run
for a certain period afterwards.
Advertisement
Table of Contents
