Table of Contents
Advertisement
Below cables are not included with the TV and need to
be purchased separately:
Please purchase the necessary cables at your local store.
●
Before you connect the AC power cord:
Be sure other devices are connected properly before plugging
in the AC power cord.
Selecting your connection quality
HDMI - Highest quality
Supports high-definition digital signals and gives highest
picture and sound quality. Video and audio signals are
combined in one cable. You must use HDMI for full high-
definition video and to enable EasyLink.
Note(s)
Philips HDMI supports HDCP (High-bandwidth Digital Contents
●
Protection). HDCP is a form of digital rights management that protects
high-definition content in Blu-ray Disc™ or DVDs.
Composite - Basic quality
For analog connections. Composite video/Audio analog cable
usually combine a yellow video cable with red/white audio
(L/R) cables. With this unit, yellow cable must be connected to
Y (yellow) jack on the composite video input jacks.
Back to Contents
Connecting your devices
HDMI digital connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high-
definition digital video and multi-channel digital audio through
a single cable.
IN
HDMI cable
HDMI-DVI connection
This unit can be connected to a device that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it
requires audio cable for analog audio signal as well.
IN
IN
HDMI-DVI
conversion cable
Audio (L/R) cables
Note(s)
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High
●
speed HDMI cable is recommended for the better compatibility.
For HDMI connection
The unit accepts 480i/480p/720p/1080i, 1080p 24/30/60Hz of video
●
signals,
32kHz/44.1kHz and 48kHz of audio signals.
If you are using a source capable of greater resolution such as 4K or 4K
●
HDR, please lower the output resolution on the device to 1080p@60Hz.
This unit accepts a 5.1 channel audio signal (Dolby Digital) and 2 channel
●
audio signal (LPCM).
This unit accepts only signals in compliance with EIA861.
●
For HDMI-DVI connection
The unit accepts 480i, 480p, 720p, 1080i, and 1080p video signals.
●
HDMI-DVI connection requires separate audio connections as well and
●
the audio signals are output as analog (L/R) audio.
DVI does not display 480i image which is not in compliance with EIA/
●
CEA-861/861B.
12
.
English
Set-top box
or
Blu-ray Disc™/
DVD player
or
OUT
HD game console
Cable receiver or
set-top box with the
OUT
DVI output jack
OUT
Continued on next page.
Advertisement
Table of Contents
