Upgrading The Software; Connecting Devices; Selecting Your Connection Quality - Philips 32PFL5708/F7 User Manual

Upgrading the software

USB upgrade
You can upgrade the software by using USB Memory Stick.
1
Connect your USB Memory Stick with the upgrade file to the USB
terminal on the side of your TV.
2
(MENU) to display Home Menu and use ▲▼ to select
Press
Features, then press OK.
3
Use ▲▼ to select Software upgrade, then press OK.
4
Use ▲▼ to select Upgrade, then press OK.
5
Use ▲▼ to select USB.
6
Use ▲▼ to select Check, then press OK.
7
Read the on-screen instructions and confirm that you want to
continue with the installation.
Picture Picture Software upgrade
Sound Sound
Software upgrade in progress. Please wait. Software upgrade in progress. Please wait.
Setup Setup
Do not remove the USB storage device or turn TV off
while upgrade is in progress.
Features
USB USB
Current Version:
New Version:
50%
8
When the software upgrade is completed, remove the USB
Memory Stick, then press OK to reboot the TV.
9
Unplug the AC power cord for a few seconds from AC outlet and
plug it again.
10
Press again to turn the unit On.
• The TV starts up with the new software.
For further assistance, please contact Call Center.
Note
• All settings will remain the same even if you update the software
version.
v2.04
v2.05

6 Connecting devices

No supplied cables are used with these connections:
• Please purchase the necessary cables at your local store.
Before you connect AC power cord:
Be sure other devices are connected properly before plugging in the AC
power cord.

Selecting your connection quality

HDMI - Highest quality
Supports high-definition Digital signals and gives highest picture and
sound quality. Video and Audio signals are combined in one cable. You
must use HDMI for full high-definition video and to enable Philips
EasyLink.
Note
• Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a
form of Digital Rights Management that protects high definition content in Blu-ray discs
or DVDs.
• The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows
output of TV Audio to an HDMI-ARC-compliant device.
Component (Y Pb Pr) - High quality
Supports high-definition Analog signals but gives lower picture quality
than HDMI. Component (Y/Pb/Pr) Video cables combine Red / Green /
Blue video cables with Red / White Audio (L/R) cables. Match the cable
colors when you connect to the TV.
Composite - Basic quality
For Analog connections. Composite Video / Audio Analog cable usually
combine a Yellow video cable with Red / White Audio (L/R) cables.
With this unit, Yellow cable must be connected to Y (Green) of
Component Video Input jacks.
29
English