Samsung C32G3 T Series User Manual page 20

2nd 3rd
Sound
Reset All
USB Update
Self Diagnosis
Description
Operate the Jog key up/down to activate/deactivate the muffler function and adjust the volume.
Return all the settings for the product to the default factory settings.
Update software using an update file on a USB device.
1
Save the update file (in .bin format) that you downloaded from the Samsung Electronics website (http:/ /www.samsung.com/sec) to a USB device.
2 Connect the USB device to the SERVICE port (
Select → Support → Software Update
3 Follow the instructions on the screen to proceed with update.
4
Your product will turn itself off and on again automatically after completing update, and then turn off your product .
5
Remove the power cord from the power outlet and then reconnect the cord after turning off.
― To perform software update by using a USB device, first format the USB device to FAT32
― When updating by a USB device, be sure to use the device whose version of USB 3.0 or lower.
― When performing update, make sure that only one BIN file ( .bin) is saved in the root directory.
― If the
No USB devices detected. Please check and try again.
― A USB device is not connected to the SERVICE port (
― The files in the connected USB device are not compatible formats.
― There are no valid update files found in the connected USB device. (There are no update files saved in the memory or the file names are incorrect.)
Perform this test when you experience a problem with your monitor's picture.
― Never turn off the power nor change the input source during self diagnosis. If possible, try not to interrupt testing.
) on the monitor.
.
message is displayed, this is probably due to the following reasons.
) .
20