Resetting The Printer - Brady BradyPrinter S3700 User Manual

Problem
Labels are being cut incorrectly or
too deeply when using the XY
cutter.
Current ribbon color: Black
For this multi-color job, load this
ribbon last.
To continue, load another required
ribbon, then press any key.

Resetting the Printer

If the screen "freezes" (i.e., does not accept any keystrokes), reset the printer.
1. Press and hold the power button for 5 seconds.
The system performs the initialization process and starts the printer.
Note: If the printer still does not initialize after holding the power button:
2. Use the On/Off switch to turn the power off and back on.
IMPORTANT!
BradyPrinter S3700 User Manual
Cause
Blade height, cut depth or cut
accuracy may need adjusting.
Currently installed ribbon is a
continuous color monochrome
black ribbon.
If multi-color print job is selected,
the label quality is better when
black is printed on top of the other
colors.
Any data in the Editor at the time of the reset will be lost.
Corrective Action
Verify the blade height. See
Cutter Blade Height on page
Adjust the cut depth. See
Cutting on page 57.
Adjust the cut accuracy. See
Adjusting Cutter Accuracy on
page 59.
Load required ribbon color.
Troubleshooting
XY
58.
XY
113