Husqvarna BS 75 Operator's Manual page 18

5. Remove the 7 screws.
6. Remove central bolt to release bearing hub.
7. Remove the 5 nuts.
8. Remove the vibration damping plate and the 5
vibration damping units.
9. Install 5 new vibration damping units in the opposite
sequence.
To replace the vibration damping units BS 110
1. Remove the blade. Refer to
page 19 .
WARNING:
with Kevlar. The blades are very sharp.
2. Remove the weights. Refer to
the weights BS 110 on page 11 .
18
To replace the blade on
Use protective gloves
To remove and install
3. Remove the 6 screws and the bottom cover.
4. Remove the 5 nuts and the cutting head.
5. Remove the 5 washers (A).
C
A
6. Remove the 5 screws (B) and the 5 vibration
damping units (C).
7. Install 5 new vibration damping units in the opposite
sequence.
B
1804 - 003 - 28.08.2023