Transmission Shift Control Lever Removal And Installation - Suzuki GRAND VITARA 2005 Service Manual

5B-9 Manual Transmission/Transaxle:
6) Pour new specified oil until oil level reaches bottom
of oil filler plug hole (3) as shown in figure.
NOTE
It is highly recommended to use API 75 W-90
gear oil.
Gear oil specifications
: API GL-4 (For SAE classification, refer to
viscosity chart [A] in figure.)
Transmission gear oil capacity (Reference)
2.0 liters (4.2 / 3.5 US / Imp. pt)
7) Install oil level/filler plug with new washer, and then
tighten it to specified torque.
Tightening torque
Oil filler plug (b): 35 N·m (3.5 kgf-m, 25.0 lb-ft)
1, (a)
[A]
o
-30 -20 -10
C
o
-22 -4 14
F
2, (b)
I5JB0B520006-01
I5JB0A520022-02
80W-90
75W-85, 75W-90
0 10 20 30 40
32 50 68 86 104
Temperature
I5JB0A520021-02
Transmission Shift Control Lever Removal and
Installation
Fix with bolt type
Removal
1) Remove front console box referring to "Console Box
Components: in Section 9H in related manual".
2) Lift up boot cover (1), boot (2) and sheet (3).
3) Remove case cover (4) and take out shift control
lever (5) from gear shift lever case (6).
Installation
1) Tighten new control lever locating bolts (1) to
specified torque, if removed.
Tightening torque
Control lever locating bolt (a): 10 N·m (1.0 kgf-
m, 7.5 lb-ft)
2) Apply grease to pivot portions and seat, then install
shift control lever.
"A": Grease 99000–25010 (SUZUKI Super
Grease A)
S5JB0B5206007
2
1
3
5
4
6
I5JB0B520007-01
"A"
1, (a)
I5JB0B520008-01