Oil Pump, Oil Pump Chain And Gasket Holder Plate Inspection; Heat Exchanger Removal And Installation - Suzuki GRAND VITARA 2005 Service Manual

6) Install oil pan and oil pump strainer referring to "Oil
Pan and Oil Pump Strainer Removal and Installation:
".
7) Install new crankshaft oil seal to gasket holder plate
using special tool as follows.
Special tool
(A): 09911–96520
a) Fit new oil seal (1) to special tool.
b) Install oil seal tapping special tool with a plastic
hammer.
8) Install timing belt referring to "Timing Belt and Belt
Tensioner Removal and Installation: in Section 1D".
Oil Pump, Oil Pump Chain and Gasket Holder
Plate Inspection
Oil Pump
Check teeth of oil pump sprocket for wear or damage.
If any malcondition is found, replace oil pump assembly.
Oil Pump Drive Sprocket
Check teeth of oil pump drive sprocket for wear or
damage.
If any malcondition is found, replace oil pump drive
sprocket.
Oil Pump Chain
Check oil pump chain for wear or damage.
If any malcondition is found, replace oil pump chain.
Gasket Holder Plate
Check gasket holder plate (1) and oil pump chain guide
(2) for wear or damage.
If any malcondition is found, replace gasket holder and/
or oil pump chain guide.
I5JB0B150037-01
S5JB0B1506005

Heat Exchanger Removal and Installation

Removal
1) Remove oil filter referring to "Engine Oil and Filter
Change: in Section 0B".
2) Disconnect water hoses (1) from heat exchanger (2).
3) Remove heat exchanger (2).
I5JB0B150038-01
I5JB0B150039-01
Engine Lubrication System:
1
1E-10
I5JB0B150040-01
I5JB0B150044-01
S5JB0B1506006
2
I5JB0B150041-01