Table of Contents
Advertisement
Removing the shelf runners
with FlexiClip telescopic
runners
You can remove the shelf runners
together with the FlexiClip telescopic
runners (if present).
If you wish to remove the FlexiClip
telescopic runners separately
beforehand, please follow the instructions
in "Features – Fitting and removing the
FlexiClip telescopic runners".
Risk of injury caused by hot
surfaces.
The steam combination oven gets
hot during operation. You could burn
yourself on the heating elements, the
oven compartment, or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool before removing the shelf
runners.
Pull the shelf runners out of the
holder (1.) at the front of the oven and
then pull them out of the oven (2.).
Refit in the reverse order.
Ensure that all parts are correctly fitted.
Cleaning and care
Removing the back panel
The back panel can be removed for
cleaning purposes.
Risk of injury caused by hot
surfaces.
The steam combination oven gets
hot during operation. You could burn
yourself on the heating elements, the
oven compartment, or accessories.
Allow the heating element, oven
compartment and the accessories to
cool before removing the back panel.
Risk of injury caused by the
rotating fan impeller.
You could injure yourself on the
impeller of the hot air fan.
Never operate the steam combination
oven without the back panel in place.
Disconnect the steam combination
oven from the mains electricity supply.
Switch off at the wall and withdraw
the plug from the socket, or switch off
at the mains circuit breaker.
Remove the shelf runners.
Undo the four screws in the corners
of the back panel and take it out.
Clean the back panel (see "Cleaning
and Care – Cleaning the catalytic
enamelled back panel").
Refit in the reverse order.
Refit the back panel carefully.
Make sure the openings are located as
illustrated in "Overview".
Refit the shelf runners.
Reconnect the steam combination
oven to the electricity supply.
97
Advertisement
Table of Contents
