Accessories; Installation Procedure - Kenwood KRC-685R Instruction Manual

Table of Contents

Advertisement

English
Accessories
External view
Number of items
@ Se
a
ee 1
Os
steele
oe eee
1
eo
§= eT
ree eae err a 2
®
)
ee
1
i!
Wale
— aaetletamratieccanaeed 4
©
OF
Bete
4
@
QD,
"sae adewlae tale 2
Do not use any accessories other than those provided with your
unit. If you use other accessories, you may damage the unit.
Installation Procedure
|
1. To prevent a short circuit, remove the key from the ignition and
disconnect the © battery.
2. Make the proper input and output wire connections for each unit. -
. Connect the speaker wires of the wiring harness.
. Connect the wiring harness wires in the following order: ground,
battery, ignition.
. Connect the wiring harness connector to the unit.
. Install the unit in your car.
. Reconnect the © battery.
. Press the reset button.
+ If your car's ignition does not have an ACC position, connect the
ignition wires to a power source that can be turned on and off
with the ignition key. If you connect the ignition wire to a power
source with a constant voltage supply,.as with battery wires, the
battery may die.
« If the console has a lid, make sure to install the unit so that the
faceplate will not hit the lid when closing and opening.
« If the fuse blows, first make sure the wires aren't touching to
cause a short circuit, then replace the old fuse with one with the
same rating.
;
¢ Do not let unconnected wires or terminals touch metal on the car
or anything else conducting electricity. To prevent a short circuit,
do not remove the caps on the ends of the unconnected wires or
the terminals.
* Connect the speaker wires correctly to the terminals to which
they correspond. The unit may be damaged or fail to work if you
share the © wires or ground them to any metal part in the car.
+ After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
* insulate unconnected wires with vinyl tape or other similar
material.
« Some disc changers need conversion cords for connection. See
the section on "Safety Precautions' for details.
& Ww
ON
OM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Krc-685wKrc-585

Table of Contents