Sony BRAVIA KDL-46S2000 Operating Instructions Manual page 34

Connecting to the TV (rear)
m
PC
[]
Digital satellite
DVD player
with component output
[]
ra
recorder
VCR
L=,= Decoder
iVideo game equipment
DVD player
Decoder
Hi-Fi
To connect Do this
PC []
Connect
to the PC -*_/-_
sockets. It is recommended to use
a PC cable with ferriles.
Digital satellite
receiver o1"DVD
player []
Connect to the HDMI 1N 4 socket
if the equipment has a HDMI
socket. The digital video and audio
signals are input from the
equipment. If tl_e equipment has a
DVI socket, connect the DVI
socket to the HDMI IN 4 socket
through a DVI - HDMI adaptor
iuterlhce (not supplied), and
connect the equipment's audio out
sockets to the audio in HDMI 1N 4
sockets.
Note
The HDMI sockets only support the
following video inputs: 480i, 480p,
576i, 576p, 720p and 1080i. To
connect a PC, please use the PC input
socket.
DVD player 'wifla Connect to the component sockets
component oulpul and Ihe audio sockets "*',_1"-@3.
[]
Video game
equipment, DVD
player or decoder
[]
DVD recorder or
VCR thai supporls
SmartLink []
Connect to the scart socket _/
-*'_ 1. When you connect the
decoder, the scrambled signal from
the TV tuner is output to the
decoder, then the unscrambled
signal is output l)'om the decoder.
Connect to the scart socket @-_/
'-*_2. SmartLink is a direct link
between the TV and a VCR/DVD
recorder.
Hi-Fi audio
equipmenl []
Connect to the audio output
sockets @ to listen to the sound
from the TV on Hi-Fi audio
equipment.
34 GB