Maintenance - Pioneer PL-514 Operating Instructions Manual

Table of Contents

Advertisement

The PL-514's phono cables and ground lead are
attached
to the rear panel of the turntable. The
phono
cable with the white plug is for the left
channel and the one with the red plug is for the
right channel. The thin wire with the Y-shaped
connector
at the end
is the ground
lead. This
should be firmly connected to the ground terminal
on the amplifier (Fig. 10).
Stereo amplifier's
PHONO ;
Phono cables
3 white (L)
Ground —Q>
om
—&
&
cord
red (R)
Ground lead
Fig.
10
MAINTENANCE
LUBRICATION
used reliably for about 2000 to 2500 hours. This
is equivalent to 1.5 to 2 years in normal usage
(an average of 3 to 4 hours per day). Replenishing
continued high performance. Perform oiling care-
fully as described below:
1. Remove the dust cover.
2. Place the tonearm on the arm rest and clamp it.
4. Lift the platter straight up by inserting fingers
and thumb into the two openings.
5. Apply one or two drops of the lubricating oil to
the hole (Fig. 11).
Ciling holes
for motor
Fig. 11
NOTE:
If oil should adhere to the motor pulley, inner rim, or
belt, wipe it off with a cloth moistened with pure alcohol.
CABINET
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents