Table of Contents
Advertisement
2.13.11
Smart PTT (Conventional Only)
Smart PTT is a per-personality, programmable feature used to keep radio users from talking over other
radio conversations. When Smart PTT is enabled in your radio, you cannot transmit on an active
channel.
The following table shows the variations of Smart PTT.
Mode
Transmit Inhibit on Busy Channel with Carrier
Transmit Inhibit on Busy Channel with Wrong
Squelch Code
Quick-Key Override
2.13.12
Viewing the IP Address
When and where to use: This feature displays the IP address.
Procedure:
1 Perform one of the following actions:
•
Press the preprogrammed IP button.
•
Press the Menu Select button directly below IP.
The display shows the IP Address screen.
2 Press Exit to return to the Home screen.
2.13.13
Transmit Inhibit
This feature is available for APCO 25 trunking, Type II trunking and Conventional operations for all
APX radios.
When Transmit Inhibit feature is enabled, the radio stops all transmission including voice and data. The
radio can receive messages but is not able to reply the acknowledgment request of the received
message.
User can physically control the transmission of the radio especially during operation in hazardous
environments with this feature. An environment is considered hazardous when the power emitted by
the radio power amplifier could initiate an explosion or other dangerous reactions.
When the Transmit Inhibit feature is disabled, the radio functions according to its normal operations.
The radio sounds alert tone when user enters or exits this feature and also when PTT is pressed.
Chapter 2: Advanced Features
Description
You cannot transmit if traffic is detected on the
channel.
You cannot transmit on an active channel with a
squelch code or (if secure-equipped) encryption
key other than your own. If the PL code is the
same as yours, the transmission is not prevent-
ed.
Your radio must be preprogrammed to allow
you to use Quick-Key Override. This feature
works with either one of the two above varia-
tions. You can override the transmit-inhibit state
by quick-keying the radio (press PTT button
twice within the preprogrammed time limit).
68012005016-DJ
63
Advertisement
Table of Contents
