Advertisement
11/25/2019
Note If the power injector is not securely fastened, continue making small adjustments until you are
satis ed.
Speci cations
This table lists speci cations for the power injectors:
Speci cation
Electrical
Connectors
Dimensions (L, W, H)
Stacking restrictions
Mechanicals
Regulatory Information
The following information is for FCC compliance of Class B devices:
The equipment described in this manual generates and may radiate radio-frequency energy. If it is not
installed in accordance with Cisco's installation instructions, it may cause interference with radio and
television reception. This equipment has been tested and found to comply with the limits for a Class B digital
device in accordance with the speci cations in part 15 of the FCC rules. These speci cations are designed
to provide reasonable protection against such interference in a residential installation. However, there is no
guarantee that interference will not occur in a particular installation.
Modifying the equipment without Cisco's written authorization may result in the equipment no longer
complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use the
equipment may be limited by FCC regulations, and you may be required to correct any interference to radio
or television communications at your own expense.
You can determine whether your equipment is causing interference by turning it o . If the interference stops,
it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes
https://www.cisco.com/c/en/us/td/docs/wireless/power/quick/guide/pwrinj5.html
Cisco Aironet Power Injector (AIR-PWRINJ5) Installation Guide - Cisco
AIR-PWRINJ5=
AIR-PWRINJ5=
802.3af compliant 15.4 W power
2 RJ-45 10/100/1000 (Cat 5 or better Ethernet cable)
165 mm x 65 mm x 36 mm (6.5 in x 2.6 in x 1.4 in)
Do not stack. Do not bundle the power injector and AC power cable.
5/6
Advertisement
