Wired Remote Controller (Uty-Rlr) - Fujitsu AJ 126LELDH Series Design & Technical Manual

2-17. Wired remote controller (UTY-RLR)
¢ Remote controller address confirmation
1. Select "15" in Menu 2 settings. Then press the ENTER button.
2. The address of this unit is displayed on the screen.
Press the ENTER button to return to the Menu 2 item selection screen.
NOTE: The address of this unit is set automatically. Do not change the indoor unit remote con-
troller address from the factory setting "0". (Verify that the address is "0".)
¢ Master or slave setting of remote controller
1. Select the "06" in Menu 2 Settings. Then press the ENTER button.
2. Select the "0: Master" or the "1: Slave" with the + or - buttons.
2-17. Wired remote controller (UTY-RLR)
" is displayed:
"
Address automatically
allocated
Not displayed:
Address manually
allocated
: Master
Remote controller address
01 to 32
: Slave
- (07-125) -
2. Function settings