Fujitsu AJ 126LELDH Series Design & Technical Manual page 911

• SW4: Setting prohibited
• SW5: Setting prohibited
• SW6: Memory backup setting (Only for wired remote controller)
Set to "ON" to use batteries for the memory backup.
If there is a power failure when this setting is enabled, all the settings stored in the memory
will be saved.
NOTE: Never turn it "ON" in the case of simple remote controller.
2-12. Simple remote controller (UTY-RSK, UTY-RHK)
SW4
OFF
ON
SW5
OFF
ON
SW6
OFF
ON
Fixed at OFF
Setting prohibited
Fixed at OFF
Setting prohibited
Memory backup
Disable
Enable
- (07-115) -
Factory setting
♦
Factory setting
♦
Factory setting
♦
2. Function settings