3. Lift the camera module from the display assembly.
Installing the camera module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the camera module and provides a visual representation of the installation
procedure.
Steps
1. Adhere the camera module in its slot on the display assembly.
2. Connect the camera cable to the camera module.
Next steps
1. Install the
display
hinge.
2. Install the
display
panel.
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the
wireless
card.
6. Install the
base
cover.
7. Install the
SD
card.
8. Follow the procedure in
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
67