Table of Contents
Advertisement
Installing the camera module
CAUTION:
The information in this section is intended for authorized service technicians only.
NOTE:
This procedure is applicable for systems shipped with a plastic chassis only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the camera module and provide a visual representation of the installation
procedure.
Steps
1. Adhere the camera module in its slot on the display assembly.
2. Connect the camera cable to the camera module.
Next steps
1. Install the
display
panel.
2. Install the hinges.
3. Install the
display
bezel.
4. Install the
hinge
caps.
5. Install the
display
assembly.
6. Install the
wireless
card.
7. Install the
base
cover.
8. Install the
SD
card.
9. Follow the procedure in
Display cover and antenna assembly
Replacement of the display cover and antenna assembly
CAUTION:
The information in this section is intended for authorized service technicians only.
102
Removing and installing Field Replaceable Units (FRUs)
After working inside your
computer.
Advertisement
Table of Contents
