Unpacking And Checking Contents; Bolt Finder; Tools Required; Table Of Loose Parts - Craftsman 149.236321 Owner's Manual

UNPACKING AND CHECKING CONTENTS
Model 149.236321 Jointer-Planer is shipped complete in one
carton.
Separate all parts from packing materials and check each one
with the illustration and the list of loose parts to make certain
all items are accounted for, before discarding any packing
material.
If any parts are missing, do not attempt to assemble the
jointer-planer, plug in the power cord or turn the switch on
until the missing parts are obtained and are installed correctly.
Wipe all parts thoroughly with a clean, dry cloth.
Apply a coat of clear automobile paste wax to the tables.
,_WARNING: FOR YOUR OWN SAFETY, NEVER CON-
NECT TO POWER SOURCE UNTIL ALL ASSEMBLY
STEPS ARE COMPLETE, AND YOU HAVE READ AND
UNDERSTAND THE SAFETY AND OPERATIONAL INSTRUC-
TIONS.
BOLT FINDER
LU.
tm_
z.
LL,
u_
O-
rn_
w_
O:
F-:
LU_
_z:
,m:
IJJ.
F-'
O"
a:
Z:
Use to identify fastener
size. Hold head of screw
against folded edge. In-
side diameter of sized
circle is for nut, outside
diameter is for screw.
3/8" 5116" 1/4" ÷10 4,8
2"
1/2' 3/4 1_2 '1_
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QTY,
NO.
A Jointer-Planer ..................................... 1
B Fence ............................................. 1
C Fence Bracket ..................................... 2
D Fence Segment .................................... 2
E Tilt Indicator Assembly .......................... 2
F Chip Deflector ..................................... 1
G Hand Knob .................................... 1
' H 3/8" Lockwasher ................................... 1
"J 1/4"-20 x 3/4" Hex Cap Screw ....................... 4
"K 1/4 Split Lockwasher ............................... 4
*L 1/4 Flat Washer .................................... 4
M Fence Lock Knobs .................................. 2
N 9132"lDx17132"ODx118"ThickWasher ............ 2
*O #10.24 x lf2 Machine Screw ...................... 2
*P #10 Flat Washer .................................... 2
"Q #8-32 x 1/2" Flat Head Machine Screw ............... 6
"R #8-32 Hex Nut ...................................... 6
*S #8 Flat Washer ..................................... 6
T Push Block ........................................ 2
U 2-112"tol-ll4"Vac. HoseAdapter ................... 1
V 5/32" Hex Key (Allen Wrench) ....................... 1
W Owner's Manual ................................... 1
X Cutter Guard Assemply .......................... 1
* Supplied in loose parts bag
B
\
C
D M X
G
e
TOOLS REQUIRED
14mm or 9/16" Wrench
10mm Wrench
8mm or 5/16" Wrench
Medium Slotted Screwdriver
#2 Phillips Screwdriver
,i
Combination
Square