Table of Contents
Advertisement
6. FILTER
C HANGE
Risk of dust dispersion - Use personal safety equipment
Unhealthy dust can be spread during filter change. Accordingly, the user should wear protective glasses,
protective gloves, and a breathing mask conforming to protection class FFP3.
Remember to switch off the machine and pull the plug out of the outlet before servicing.
Pre-filter
Loosen the latches between the tank and the lower cyclone. Loosen the latches at the hose connection between
the tank and the absolute filter cover. Rotate the tank forward. Rotate the filter plate counter clockwise 10
degrees and carefully turn filter and holder upside down. Place a plastic bag over the filter unit. Lift the filter
carefully and pinch up the bag by hand and then tie the bag up. This bag must be properly disposed of.
Insert a new complete filter package in reverse order. Only original filters may be used
Important:
It is not possible to replace individual tubes. If one is broken, the complete filter needs to be replaced.
Hepa Filter
Loosen the latches holding the filter cover and carefully lift the filter up and into a plastic bag. This bag must be
properly disposed of. Insert new filters in reverse order.
Important:
Hepa filters can't be cleaned, trying this might destroy it. When installing the replacement filter, make sure to
not touch the inside of the filter. Any kind of force/damage on the inside of filter media will destroy the new
filter.
Recommended intervals for filter change: Socks filter every 6 months and Hepa filter every 12 month.
7. SERVICE
When cleaning and servicing the machine, you must switch off the machine and remove the plug from
•
the outlet.
Avoid cleaning with a high pressure cleaner. If necessary, do not direct at the openings on the machine,
•
especially the opening for cooling air.
Before moving the machine from the work area, the machine must be cleaned.
•
All other equipment must be regarded as contaminated and be treated thereafter.
•
If possible, use a special suitable room.
•
Proper personnel protective equipment must be used. Dust can be spread when the coarse filter and the
•
absolute filter are replaced that can be hazardous to health. Accordingly, the user should wear protective
glasses, protective gloves, and a breathing mask conforming to protection class FFP3.
All parts which are contaminated after service must be properly disposed of in plastic bags according to
•
all regulations.
If the machine has to be used for other purposes, it is extremely important that the machine is cleaned,
•
to avoid the spread of hazardous dust.
Do not puncture the Hepa filter. Risk of dust dispersion.
•
Replacement parts, filters and dust collection system
Part
n o:
590426101
Longopac
( 4-‐bags)
590396101
Plastic
b ags
( 25-‐pcs)
590433801
PRE-‐FILTER
( ex.
T 7500)
590445701
PRE-‐FILTER
( ex.
T 10000)
590444201
PRE-‐FILTER
( ex.
T 18000)
200800006
PRE-‐FILTER
N O
T ENSIONER
( ex.
T 18000)
590433701
HEPA
F ILTER
1 00%
D OP
590435901
HEPA
F ILTER
1 00%
D OP
U SA
WARNING
Description
T7500
T8600
T10000
1
1
1
1
1
1
1
1
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
2
2
3
2
2
3
T18000
1
1
N/A
N/A
1
1
4
4
Advertisement
Table of Contents
