AEG Poros GO Operation Manual page 4

2.3 插头插入后上电观察指示灯状态
Observe the indicator status after the plug is plugged in and power on
电源灯：指示插头与控制盒正确连接。
Power light: Indicates that the plug is properly connected to the control box.
连接灯：指示充电枪与汽车正确连接。
Connection light: Indicates that the charging gun is properly connected to the vehicle.
充电灯：充电灯闪烁表示在充电中；充电灯常亮表示充电完成 。
Charging light: Charging light shining indicates charging; Charging light is always on, indicate that the charging is finished.
错误灯：错误红灯闪烁/亮，表示有故障。
Fault light: Fault light blinking/bright indicates that a fault occurs.
2.4 充电枪插入汽车插口开始充电
Plug the charging gun into the car socket to start charging
把充电枪插入电动汽车的充电座，请仔细检查是否插枪到位，确保连接可靠；充电灯闪烁表示开始充电。
Fault light: Fault light blinking/bright indicates that a fault occurs.
2.5 结束充电 Complete charge
2.5.1 当在充电过程中需要中断充电，应先切断电源，枪解锁后拔出充电枪。
When the charging process needs to be interrupted, cut off the power supply first and pull out the charging gun after
the gun is unlocked.
2.5.2 当充电完成，可以先枪解锁后拔出充电枪，再拔出电源插头。
When charging is complete, you can unlock the gun and then pull out the charging gun before pulling out the power
socket.
4