Care, Cleaning & Storage - Breville AquaStation Hot Instruction Book

Care, Cleaning &
Storage
CAUTION
To prevent damage to the appliance, do not
use alkaline or abrasive cleaning agents, steel
wool or scouring pads as these can damage the
surface of the unit. Do not place any part of this
appliance in the dishwasher.
CLEANING THE AQUASTATION
1. Remove the plug from the power outlet
before cleaning.
2. Discard any water in the water tanks, then
separate the pre-filtered water tank from
the filtered water tank. Remove the filter
cartridge from the filter holder.
3. Wipe the water tanks with a clean, damp,
lint-free cloth. The filter is not washable.
CLEANING THE OUTER HOUSING
• Wipe with a soft, damp cloth followed by a
soft, dry cloth to polish.
• Alternatively, purchase a stainless steel
cleaner such as Breville's Stainless Steel
Cleaner & Polish and follow directions.
• Do not use abrasive cleansers, pads or cloths
which can scratch the surface.
NOTE
For Breville's Stainless Steel Cleaner & Polish,
visit Breville.com or contact Breville Customer
Service.
22
TAKING CARE OF THE WATER
TANK, WATER LEVEL SENSOR, AND
BRACKET
Avoid exposing the water tank to direct
sunlight, as this may cause residue or foreign
substances, such as algae, to accumulate in
the tank, on the water level sensor, and on
the bracket. Allow a few minutes for regular
dishwashing detergent to sit in the water
tank, on the sensor, and in the bracket before
rinsing thoroughly with warm water. It is
recommended that the water tank, bracket, and
water level sensor be thoroughly cleaned with
warm, soapy water on a regular basis to avoid
the build-up of residue and foreign substances.
NOTE
If you are absent for a prolonged period of
time, empty and clean the water tank and
ensure it is thoroughly dried. Replace the filter
cartridge before next use.
CLEANING THE WATER SPOUT
Residue build-up or foreign substances, such
as dust or lint, may accumulate in the water
outlet. Clean the spout periodically using a soft
brush (not included).
CLEANING THE DRIP TRAY
The drip tray should be removed, emptied and
cleaned after each use. Empty the tray before
removing the top grill and cleaning.
1. Remove the drip tray from the unit and
discard any water.
2. Separate the top grill from the drip tray.
3. Wash the drip tray and grill in warm soapy
water and dry thoroughly.
4. Place the grill back onto the drip tray then
push the assembled drip tray back into
position in front of the using the magnetic
connection.