Replacing A Fuse - Yamaha VK PROFESSIONAL-II 2016 Owner's Manual

ESU15070

Replacing a fuse

EWS00551
WARNING
Be sure to use the specified fuse. A wrong
fuse could cause electrical system dam-
age or A FIRE HAZARD.
ECS00632
NOTICE
Be sure to turn the main switch to the off
position and disconnect the negative bat-
tery lead to prevent accidental short-cir-
cuiting.
The main fuse and the fuel injection system
fuse are located under the air filter case. The
fuse box, which contains the fuses for the in-
dividual circuits, is located under the shroud.
1. Open the shroud.
2. Unhook the air filter case fastener and
disconnect the air temperature sensor
coupler.
1
1. Air filter case fastener
2. Air temperature sensor coupler
3. Loosen the joint clamp bolts.
Periodic maintenance and adjustment
2
1. Joint clamp bolt
4. Slide the oil tank breather hose clamp
away from the air filter case, and then
disconnect the oil tank breather hose.
1. Oil tank breather hose clamp
2. Oil tank breather hose
5. Lift up the air filter case, disconnect the
ISC (Idle Speed Control) unit inlet hose
and cylinder head breather hose from the
case, and then remove the case.
1. Cylinder head breather hose
1
1
2
1
71