Periodic maintenance and adjustment
1. Cylinder head cap
1. Engine oil drain bolt (oil tank)
2. Gasket
9.
Place an oil pan under the engine to col-
lect the used oil.
10. Remove the engine oil drain bolt and its
gasket to drain the oil from the crank-
case.
2
1
1. Engine oil drain bolt (crankcase)
2. Gasket
3. "
" mark
52
TIP
A "
" mark is stamped on the crankcase
near the engine oil drain bolt.
Dispose of used oil according to local reg-
ulations.
Skip steps 11–13 if the oil filter cartridge is
not being replaced.
1
11. Remove the oil filter cartridge with an oil
filter wrench.
2
1
1. Oil filter cartridge
TIP
An oil filter wrench is available at a Yamaha
dealer.
12. Apply a thin coat of engine oil to the O-
ring of the new oil filter cartridge.
3
1. O-ring
13. Install the new oil filter cartridge with an
oil filter wrench, and then tighten it to the
specified torque.
1