Changing The Size Of A Fax - Sharp MX-4100N Quick Start Manual

CHANGING THE SIZE OF A FAX

The size of the original and the transmission size can be specified before transmission.
This is convenient when faxing an original that is small and difficult to read.
The procedure for faxing both sides of an 8-1/2" x 11" original at 11" x 17" size is explained below.
The side to be scanned must be face up!
Scan Internet Fax Fax
Address Book Auto
Original Scan:
(1)
Direct TX Auto
Exposure
Sub Address
Resolution Standard
Address Review Special Modes
File
Quick File
Auto Reception
Preview
Fax Memory:100%
Fax/Original
Scan Size 100% Send Size
Auto 8½x11
2-Sided 2-Sided
Booklet Tablet
(2)
Fax/Original
Auto
Manual
Manual
5½x8½ 8½x11R 11x17
(4)
5½x8½R 8½x13(213x330) 8½x13(213x340)
8½x11 8½x14
Fax/Original
Scan Size 129% Send Size
Auto 8½x11
2-Sided 2-Sided
Tablet
Booklet
62
1
2
USB Mem. Scan PC Scan
8½x11 Send: Auto
OK
Auto
(3)
Image Orientation
OK
(5)
AB
Inch
OK
(6)
11x17
Image Orientation
Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
Select settings in the touch panel.
(1) Touch the [Original] key.
(2) Touch the [2-Sided Booklet] key.
This key is used to send a 2-sided original.
(3) Touch the [Send Size] key.
(4) Touch the desired send size key (example:
11 x 17).
(5) Touch the [OK] key.
(6) Touch the [OK] key.