New Toner Sensor Pcb Assy - Brother DCP-7057 Service Manual

9.24

New Toner Sensor PCB ASSY

(1) Rotate the machine 180° to the side of main frame L ASSY.
(2) Disconnect the flat cable of the new toner sensor PCB ASSY from the main PCB ASSY,
and remove the flat cable of the new toner sensor PCB ASSY from the guide of the main
frame L ASSY.
(3) Remove the taptite bind B M3x10 screw.
(4) Release the hooks to remove the new toner sensor PCB ASSY.
(5) Disconnect the connector from the bottom side of the new toner sensor PCB ASSY.
Main PCB ASSY
Main frame L ASSY
New toner sensor
PCB ASSY
Harness routing: Refer to
Flat cable
Guide
Hook
Fig. 3-78
"4. New toner sensor PCB
3-90
Taptite bind B M3x10
New toner sensor PCB ASSY
Connector
Flat cable
(New toner sensor PCB ASSY)
Main PCB ASSY
ASSY".
CN16
Confidential