3.12.4 A communication error occurs
Step
1
NCU PCB failure
2
Main PCB failure
3.12.5 Reception mode cannot be changed
User Check
• Turn OFF the Distinctive ring mode.
3.12.6 Caller ID are not displayed
Step
1
Main PCB failure
3.12.7 Cannot talk on the handset
User Check
• Verify that the handset curled cord is securely inserted into the socket.
• Adjust the handset volume.
Step
1
Handset curled cord failure
2
Handset ASSY failure
3
Hook switch PCB ASSY failure
4
Main PCB failure
Cause
Cause
Cause
2-101
Remedy
Replace the NCU PCB ASSY.
Replace the main PCB ASSY.
Remedy
Replace the main PCB ASSY.
Remedy
Replace the handset curled cord.
Replace the handset ASSY.
Replace the hook switch PCB ASSY.
Replace the main PCB ASSY.
Confidential