Table of Contents
Advertisement
Chapter 6 Operation via Web Browser
6.1 Login
You can login via the web browser or the remote configuration of the client software.
Note
Make sure the device is activated. For detailed information about activation, see Activation .
Login via Web Browser
Enter the device IP address in the address bar of the web browser and press Enter to enter the
login page.
Enter the device user name and the password. Click Login.
Login via Remote Configuration of Client Software
Download and open the client software. After adding the device, click
page.
6.2 Forget Password
If you forget the password when logging in, you can change the password by email address or
security questions.
On the login page, click Forget Password.
Select Verification Mode.
Security Question Verification
Answer the security questions.
E-mail Verification
1. Export the QR code and send it to pw_recovery@hikvision.com as attachment.
2. You will receive a verification code within 5 minutes in your reserved email.
3. Enter the verification code into the verification code field to verify your identification.
Click Next, create a new password and confirm it.
6.3 Overview
You can view the device component status, real-time event, person information, network status,
basic information, and device capacity. You can also control the barrier remotely.
Function Descriptions:
DS-K3G200(L)X Series Tripod Turnstile
24
to enter the Configuration
Advertisement
Table of Contents
